Pénélope

Overview

Pénélope is a console by Christophe Delcourt for Molteni&C; the datasheet heading carries 2025. The page says it captivates with organic lines and sculptural elegance, with refined materials and thoughtful geometry.

Image source: Molteni&C — Pénélope · © Molteni&C and the respective rights holders. Quoted to accompany INTEBEE's independent design commentary and research. · View official product page ↗ · Image use & copyright policy

Construction

Per the datasheet, the base is two opposing curved structures of rigid polyurethane, finished in high-gloss lacquer or covered with a sheet of polished steel. A polymorphic top above is marble with a steel edge, or oak veneer with a glossy lacquered edge.

Specifications

• PC19/45 console: 195, 45 and 61.4 cm (axes not labelled on the drawing)
• PC16/45 console: 165, 45 and 61.4 cm (axes not labelled on the drawing)
• Top options: marble, quartzite or oak veneer

Two interlocking curves

The Molteni&C page describes a base of two opposing, curved structures with soft, flowing shapes that interlock to create a dynamic visual effect. It says this sculptural form adds movement and character, while the top has a seamless polymorphic design.

Edge and base in one finish

According to the page, the finish of the edge is echoed in the base, in glossy lacquer or polished steel, so that a strong visual continuity runs through the piece. The page adds that Pénélope can stand against a wall or in the centre of a room.