Toldbod Pole

Overview

The Toldbod Pole is a round, non-tapered aluminum pole with a fixed base. Its top has a welded-in tenon that fits the Toldbod 11.4 Post Top luminaire head, and six horizontal stainless steel set screws for securing a post arm bracket are included. The pole is made in two colours.

Materials and fittings

• Extruded aluminum pole shaft in 6061-T6 alloy
• Anchor base of A356 aluminum
• Base cover of two cast aluminum halves in A360 alloy
• Anchor bolts to ASTM F1554 Grade 55 with L bend, fully galvanized, each set with two hex nuts and two flat washers
• Flush mount, covered handhole with grounding provisions

Specifications

• Overall size: 8.8 (width) x 120 (height) x 8.8 (length) in, pole only
• Base plate mounted with 4 anchor bolts
• Handhole 3 in wide x 5 in tall at 18 in A.F.G., with the ground connection inside

Shaft, tenon and set screws

The Toldbod Pole is drawn as one straight, round shaft that does not taper, standing on a fixed base. At the top, a tenon is welded into the shaft so that the Toldbod 11.4 Post Top luminaire head fits it exactly. Six horizontal stainless steel set screws, supplied with the pole, secure a post arm bracket.

Anchor base and handhole

The shaft is extruded aluminum in 6061-T6 alloy, and the anchor base is A356 aluminum. A cover of two cast aluminum halves finishes the base. Four anchor bolts fix the base plate, and a covered handhole 3 in wide and 5 in tall, with grounding provisions and a ground connection inside, is flush mounted at 18 in A.F.G.