Leggera Chair
吉奥·庞蒂1952年设计的木质单椅与扶手椅,配有软包座面;由Cassina制造。
450 × 850 × 470 mm
Source: spec sheet PDF — 646 chair (3/5_03) — published as W 45 × D 47 × H 85 cm
1952
描述
概述
Leggera(646)是吉奥·庞蒂为Cassina设计的木质椅子,提供单椅与扶手椅两种版本。Cassina的资料表注明“Designed by Gio Ponti, 1952”和“Produced Cassina, 1952/2017”;页面标题为“Design by Gio Ponti, 2017”。框架采用实木白蜡木或美国胡桃木,座面为软包,靠背为独立的衬垫坐垫,软包面料可拆卸。
结构
资料表列明其结构为实木白蜡木或美国胡桃木(饰面见价目表),座面采用弹力带,内部填充柔性聚氨酯泡沫,外部为聚氨酯配轻质天鹅绒,靠背为贴合曲面的热塑成型聚氨酯衬垫,并配有绗缝面料或绗缝皮革软包。

规格
- 尺寸(单椅,资料表 646 3/5_03): 宽45 cm,深47 cm,高85 cm;侧视图标注为46 cm
- 扶手椅(646 7/9_03): 宽50 cm,深52 cm,高85 cm;侧视图标注为66 cm与46 cm
- 框架: 实木白蜡木或美国胡桃木;页面饰面包括:原色白蜡木、白色染色白蜡木、原色染色白蜡木、黑色染色白蜡木、Canaletto胡桃木
- 软包: 15种面料系列或4种皮革系列,页面列出274种命名色彩
故事
木工工艺的合作
Cassina的资料表称,Leggera体现了始于1950年代的吉奥·庞蒂、Cesare Cassina与公司工匠之间设计与生产合作的关键节点。Cassina木工师傅面临的挑战,是在保证强度与稳定性的前提下,减轻椅架的重量,并聚焦于其本质线条。
单椅与扶手椅
资料表称,该椅现已提供标准版本与带扶手版本。页面补充说,结构的逐步精简later催生了更为纤细的699 Superleggera椅,并将其线条与传统的基奥阿瓦里(Chiavari)椅相比较。
Gio Ponti 的其他作品

699 Superleggera
Gio Ponti's 1957 ash chair with 18 mm triangular legs and a hand-woven or upholstered seat.

Bilia
Gio Ponti's 1932 table lamp: a frosted glass sphere balanced on a metal cone.

Continuum D.163.7
Gio Ponti's 1963 rattan armchair, hand-curved and made in Italy with Bonacina 1889.

D.847.1
Ponti's 1947 solid ash writing desk, with a wing-inspired top and a small rounded drawer.
